Supported Hardware - LSS4 Manual
Fiesta logo LSS 4
Search


Supported Hardware


LED Strip Studio 4 works only with LED Strip Studio controllers LEC3 (LED Ethernet Controller 3) and licensed Reactivo 2. A licensed Reactivo 2 means it was purchased together with a LED Strip Studio software license.


LED Ethernet Controller 3 (LEC3)

Ethernet-SPI pixel light controller for your project capable to control up to 4096 individually addressable RGB LED pixels including lifetime license for LED Strip Studio software.

LEC3 device

  • Art-Net or sACN SPI decoder
  • Can control up to 4096 individual LED pixel diodes
  • 4 separate SPI outputs for pixel LED strips, pixels or bars
  • Every output can control up to 1024 individual LED pixels
  • Every standard Art-Net software or lighting console supported: Madrix, grandMA, Resolume, Chamsys, Mad Mapper, Enttec ELM, and others
  • Easy to use web configuration with advanced settings
  • Integrated animation scheduler (perfect for stand-alone applications)
  • Stand-alone mode with multiple device synchronization
  • Built-in differential signal buffer (The Symmetrizer) for long distance SPI signal transmission (tested for 500+ meters)
  • Separate DMX512 output for standard RGB LED strips controlled over DMX LED dimmers
  • Can be triggered over input DMX512
  • Supported LED chips (IC): TM1809, TM1803, SK6812, WS2811, WS2812, WS2812b, APA102, APA102-65536, APA104, LPD8806, SM16716, M16726 and many more
  • RGBW support (3 or 4 color channel per pixel can be used), maximum number of RGBW LEDs is 3072


Reactivo 2

Wireless/Ethernet Art-net controller for 1024 RGB pixels.

LEC3 device

  • Art-Net to SPI decoder
  • Can control up to 1024 individual LED pixel diodes
  • Single SPI output for pixel LED strips, pixels or bars
  • Every standard Art-Net software or lighting console supported: Madrix, grandMA, Resolume, Chamsys, Mad Mapper, Enttec ELM, and others
  • Easy to use Web configuration and mobile apps with advanced settings
  • 2 connectors for wide range of physical triggers and sensors
  • Integrated animation scheduler (perfect for stand-alone applications)
  • Stand-alone mode with multiple device synchronization
  • Supported LED chips (IC): TM1809, TM1803, SK6812, WS2811, WS2812, WS2812b, APA102, APA102-65536, APA104, LPD8806, SM16716, SM16726 and many more
  • RGBW support (3 or 4 color channel per pixel can be used), maximum number of RGBW LEDs is 768