Commands

There are several types of commands that can be performed in LSS4 once an event from external controls is received.

Command	Explanation
Select Scene	Activate a scene from a specific bank. If no bank is specified, the currently selected bank is used.
Unselect Scene	Stop the currently active scene.
Select Bank	Select a bank in the LSS4 workspace.
Overlay Scene	Activate an overlay scene. You can define which scene from which bank is selected, as well as Fade In, Duration (how long the scene remains active), and Fade Out settings.
Show Control	Select which show to play or stop.
Activate Demo	Activate or deactivate one of the available demo modes.
Execute Program	Run an external program on macOS or Windows.
Play Sound	Start playing a sound file.
Stop Sound	Stop the currently playing sound file.

Conditions

There are three different conditions that can be used in LSS4 to define whether the command should be executed.

Condition	Explanation
Less Than	Command is triggered when value of controller is below this value.
Equal	Command is triggered when value of controller equals to certain value.
More Than	Command is triggered when value of controller is higher than certain value.