© Led Strip Studio 2026
PSL2 explained in 4 minutes
POWERED SPI LED CONTROLLER 2
Advanced Standalone Control for Digital LED Systems
Compact, industrial-grade controller with a built-in 100W power supply—eliminates messy wiring and drives up to 1024 RGB or 768 RGBW pixels with clean, reliable performance from a single unit.
POWERED SPI LED CONTROLLER 2
One Controller.
Zero Complexity.
Messy racks full of power bricks and converters turn pixel setups into a “science project.” The PSL2 replaces that complexity with a single, rugged solution.
Problem
Multiple power supplies
Tangled wiring
Time-consuming setup
Failure points everywhere
Solution
Integrated power + control
Rugged aluminium enclosure
Single-unit install
Reliable performance
POWERED SPI LED CONTROLLER 2
Powerful by Design
Available in 5V, 12V, or 24V versions
No converters needed
Wi-Fi or wired—your choice
Runs standalone or on your network
No laptop needed
Run shows from a 32GB Micro SD card, auto-play on power-up, or trigger scenes via external sensors and buttons
Control up to 1,024 RGB pixels
or 768 RGBW pixels
Configure directly on the device
Built-in display + buttons
Wide LED Chip Support
TM1809, TM1803, SK6812, WS2811/12, APA102/104, LPD8806, SM16716/26, and more.
POWERED SPI LED CONTROLLER 2
Built-In Interface
Configure and operate the PSL2 directly from its onboard display and controls. Adjust brightness, speed, and playback effects without external software for faster setup and operation.
OLED Status Display
Monitor settings and system status in real time
Tactile Navigation Buttons
Four onboard buttons provide quick, intuitive access
POWERED SPI LED CONTROLLER 2
Installation Advantages
Built for plug-and-play deployment, PSL2 reduces wiring, hardware, and install time—ideal for rentals, studios, and permanent installations.
Power short runs directly
For typical 5m pixel strips, the controller can often supply power directly—no separate injection wiring needed.
Fewer cables. Cleaner installs.
Eliminate extra power supplies and custom cabling. Reduce clutter and failure points.
Faster installs, less labor.
When labor costs outweigh hardware, faster installs and easier maintenance make a real difference.
POWERED SPI LED CONTROLLER 2
Use Cases
Designed for fast, reliable LED deployments across events, studios, and installations where simplicity and speed matter.
POWERED SPI LED CONTROLLER 2
Advanced Standalone Control
350.00 EUR
Integrates seamlessly into existing lighting workflows and can be controlled from any ArtNet or sACN-capable software or console.
PACKAGE CONTENTS
- POWERED SPI LED CONTROLLER 2
- Quickstart Guide
- 64GB Micro SD Card
- SD Card Reader
- 1 x Terminal Block Plug
- Super Fancy Ballpoint Pen with Touch Screen Tip
POWERED SPI LED CONTROLLER 2
FAQ
What power and voltage variants are available?
PSL2 integrates a 100W power supply that plugs directly into a standard AC outlet (86–264 VAC).
It comes in three factory variants: 5VDC/10A, 12VDC/5A, and 24VDC/2.5A.
Check the label on top of your device to confirm your model.
How many pixels can a single controller handle?
A single unit controls up to 1,024 RGB pixels or 768 RGBW pixels per output. The number you can power directly depends on the 100W internal limit—for example, the 12V variant powers roughly 6.9 meters of WS2815 strip. For longer runs, the controller acts as a signal generator while you add external power to the strips.
What software is compatible?
LED Strip Studio 4 (requires license or device activation)
Art-Net/sACN software: Madrix, MadMapper, Resolume, ChamSys
Lighting consoles: grandMA and any standard DMX512 source
Mobile: LSS Remote app for iOS and Android
How do I set up the Wi-Fi connection?
The built-in 2.4GHz Wi-Fi operates in two modes:
- Access Point (AP) mode — default; creates its own network at 192.168.4.1 for direct phone or laptop control
- Client mode — joins an existing network via WPS pairing to receive wireless Art-Net or sACN data
Which LED protocols (IC types) are supported?
Can I run animations without a computer?
Yes. Standalone and Autoplay modes use a Micro SD card (FAT32, up to 32GB). Store up to 32 animation files in a playlist, set them to loop or shuffle, and trigger specific scenes via external sensors or buttons connected to the trigger inputs.
What are the mounting and installation options?
The rugged aluminum enclosure (IP30, 150.6 × 48.1 × 85.2 mm) includes integrated side tabs for mounting via screws, cable ties, clamps, or safety wires. It’s compact enough to conceal in stage scenery or tight spaces.
What warranty does this product carry?
LED Strip Studio provides 2–5 years of warranty on professional hardware, refined over 14+ years of real-world club and stage installations.
How does this compare to a separate controller + power supply?
It eliminates external power bricks and complex DC wiring, reducing connection failure points and cleaning up your rack. Think of it as a “show in a box”—ideal for rental projects and fast setups where reliability is critical.
Any questions?
Contact us.