Firmware LED Ethernet Controller

Firmware

Versions & changes

3.11
  • add FPS status
  • fixed FPS from software
  • now it is possible to change MAX LEDs from 4096 to smaller count
  • IC compatibility added to web page info
  • add button Identify the Device list
  • minor web page bug fixes
3.10
  • fixed activation state – after hardware factory reset (buttons)

 

3.9
  • add Snake pattern into test mode
  • add device list
  • add update FW for STCL strip devices
  • max LEDs count shows on status page (3.2 board only)
  • now you can see the content of SD card
  • now you can see activation state
  • now you can activate device over a web page
  • now you can set max LEDs number over a web page
  • minor bug fixes and stability improvements
  • STCL strip RGB from SW now works properly
  • minor web page bug fixes
3.8
  • add STCL strip type (3.2 board only)
  • add max device LEDs limiter (3.2 board only)
  • add interactive page
  • improved change of Control mode between Ethernet and Art-Net
  • now you can enable/disable web password requirements (default is disabled)
  • when you change Max brightness, the value will be highlighted

 

3.7
  • add FW for 3.2 board (not compatible with previous boards)
  • the web page now shows HW version

 

3.6
  • add *.LN2 file play
  • add Playlist for autoplay
  • add RGBW to SW
  • add a white channel to re-color over Art-Net/DMX SD Card mode
  • add a white channel to color order for strip outputs
  • improve interpolation in player
  • fixed Test mode for distributor
  • after change mode send Black frame to LEDs

 

3.5
  • improved communication

 

3.4
  • speed up communication
  • Art-Net configure works correct

 

3.3
  • add RGBW strip WS2811_RGBW 800kHz
  • add a button for the reset to factory settings to web settings
  • fixed device type signaling
  • fixed max brightness used for the distributor in ethernet

 

3.2
  • after reset to default settings, the device stays activated
  • fixed issue with strip IC types not working properly outside of LSS software

 

3.1
  • add Reset command to default animation for autoplay
  • add Turn off command for autoplay
  • now max brightness controls all distributors
  • Art-Net in pixel mode can be received when OUT1 is OFF
  • DMX file play bug fixed

 

3.0
  • First user release

[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/3″][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row]