3x SPI LED Controller (SAVE 50 EUR)

400.00 excl. VAT

Smallest stand-alone digital LED controller. A single device can handle 1024 RGB or 768 RGBW pixels.


Effects and shows can be created in our LED Strip Studio Software and easily uploaded to Micro SD card. Store up to 255 effects and trigger them using hardware buttons or DMX.



SPI LED Controller supports most common connectors such as 2 x RJ-45 and one SPI connector (2EDGK) for your LEDs. You can also find a slot for SD-Card and buttons for control in stand-alone mode.


SPI LED Controller offers several DMX modes


1. DMX pixel mode, where each LED pixel can be created with one or several LEDs.

2. DMX Trigger mode (SD-Card), where you can use DMX as trigger stored animations on SD-Card.


SPI LED Controller to use RJ-45 connectors as DMX in and DMX out. Complete scheme how to make an adapter from RJ-45 to 3 pin XLR in/out you can find in the user manual.

Additional information

Weight 159 g
Dimensions 90 × 56 × 69 mm
Maximum of LEDs


SPI LED Outputs


Maximum of LEDs per Output


Required power

5-24V/ 0.3A (PCB only, wihout the LED strips / LED pixels)

Pass-Thru Current


Power connector

pluggable terminal block with 5 mm contact spacing e.g. SH04-5-GY

SPI OUT connector

pluggable terminal block with 5 mm contact spacing e.g. SH04-5-GY

DMX in port connector type


DMX out port connector type


SD Card

Micro SD Card (FAT32, up to 32GB)



User Manual




You may also like…

Recent Posts


Join more than 5000+ subscribers

Get the latest news and special offers

[mc4wp_form id="230"]