Description
3x REACTIVO 2: Three Controllers, One Order
The 3x REACTIVO 2 bundle gives you three complete Art-Net™ pixel controllers at a bundle price. Buy them together and keep the saving for the next project. One unit goes into the install, another covers the second zone, and the third waits on the shelf. In short, that is how most pixel projects end up anyway.
What Does a Single REACTIVO 2 Do?
REACTIVO 2 is an Art-Net™ to SPI decoder for up to 1024 RGB pixels. Art-Net is simply DMX over Ethernet, so any console or media server can drive it. Moreover, the same unit keeps playing on its own when the network goes quiet.
Art-Net Over Ethernet or Wi-Fi
Control arrives on wired Ethernet or on 2.4 GHz Wi-Fi. Cable gives you the reliable connection for fixed installations. Wi-Fi, on the other hand, follows moving objects and rotating props.
Standalone Playback From an SD Card
Load animations onto the micro SD card and each controller plays them alone. A playlist runs from the browser or from the Android and iOS app. As a result, no laptop has to stay on site overnight.
Triggers Turn Sensors Into Cues
External sensors and buttons start pre-programmed animations stored on the card. Each trigger can also set brightness, speed or blackout. Dedicated screen-grabbing software covers live content from a computer.
Why Buy the 3x REACTIVO 2 Bundle?
Pixel projects rarely stay at one controller. A second zone appears, or a client asks for the next room. Because all three boards are identical, wiring, patching and settings stay the same everywhere. Device synchronization then lets one master send commands to the other two.
OEM or Full Kit — Choose Your Package
The bundle ships in two package versions. OEM contains the three controllers alone, for integrators who already stock cables and cards. The full kit adds a sensor board, a micro SD card with reader, a USB power cable and an Ethernet cable. Select the version before adding the bundle to your cart.
Where the 3x REACTIVO 2 Bundle Fits
Each controller measures 85 x 40 x 25 mm and weighs only 47 g. Therefore it hides inside a truss clamp, a prop, a display plinth or a ceiling void. It works with WS2811, WS2812B, WS2815, SK6812, APA102 and more — see the supported IC list. Keep the signal run between 5 and 10 m, or add THE SYMMETRIZER for longer distances. Every unit also speaks the LED Strip Studio protocol after activation. Designed and manufactured by Showtacle in Bratislava, Slovakia, with a 2-year limited warranty.
