Every pixel installation starts with one question. What will actually drive the LEDs? LEC 3 answers it for four SPI lines at once.<\/p>\n
The controller handles up to 4096 addressable RGB pixels. In RGBW mode the limit is 3072. Each of the four powered outputs runs 1024 RGB pixels.<\/p>\n
Need more? Add LSS Distributors and one controller reaches 8096 pixels. Moreover, several LEC 3 units share a single Ethernet switch. As a result, installations of 50 000 pixels and more stay on one network.<\/p>\n
First, Ethernet. LED Strip Studio software sends video, live stream and generated effects in real time. You can also build a full show on a timeline and sync it to music.<\/p>\n
Second, Art-Net\u2122. LEC 3 works as a direct pixel output for Madrix, MadMapper or MA Grand consoles. Each output accepts up to seven universes.<\/p>\n
Third, DMX512. The 3-pin XLR input and output work in pixel mode. Alternatively, DMX simply triggers animations stored on the card.<\/p>\n
Finally, stand-alone. The controller plays up to 255 animations from the micro SD card, or a 16-step playlist. You switch files by buttons, DIP switch or web interface.<\/p>\n
DMX Out runs in Out and Through mode. Therefore the same controller also feeds analogue strips, PARs and other DMX fixtures. Digital and analogue lighting stay on one timeline.<\/p>\n
Type the device IP into any browser. By default it is 192.168.1.147. Then set LED IC type, colour order, brightness ceiling, universes and playlists. A phone works just as well as a laptop.<\/p>\n
Built-in test patterns confirm wiring before the strips go up. Firmware updates arrive from the SD card, or through the web interface.<\/p>\n
The 5\u201324 V DC input matches your strip voltage. Each output carries up to 5 A. Above that, a resettable polyfuse protects the board instead of letting it burn.<\/p>\n
Two RJ-45 ports share an internal switch. Consequently, controllers daisy-chain without extra hardware.<\/p>\n
The body measures 142 \u00d7 69 \u00d7 44 mm, or 207.2 mm across the brackets. L-brackets and a DIN rail mount are included. Designed for indoor use.<\/p>\n","protected":false},"excerpt":{"rendered":"
LEC 3 is the LED Ethernet controller at the heart of the LED Strip Studio system. Four powered SPI outputs drive up to 4096 addressable pixels, and you can run them live from LED Strip Studio software, from any Art-Net console or DMX desk, or from the built-in SD card player when nobody is on site. The DMX output brings analogue fixtures into the same show.<\/p>\n","protected":false},"featured_media":44,"template":"","meta":[],"product_brand":[261],"product_cat":[16],"product_tag":[],"class_list":["post-23","product","type-product","status-publish","has-post-thumbnail","product_brand-led-strip-studio","product_cat-controllers","first","instock","taxable","shipping-taxable","purchasable","product-type-variable","has-default-attributes"],"yoast_head":"\n