{"id":18760,"date":"2026-09-04T10:23:30","date_gmt":"2026-09-04T08:23:30","guid":{"rendered":"https:\/\/ledstripstudio.com\/lss2026\/shop\/?post_type=product&p=18760"},"modified":"2026-10-14T09:47:52","modified_gmt":"2026-10-14T07:47:52","slug":"edison-cct-light-bulb-mega-set","status":"publish","type":"product","link":"https:\/\/www.ledstripstudio.com\/shop\/product\/edison-cct-light-bulb-mega-set\/","title":{"rendered":"Edison CCT Bulb MEGA SET \u2013 64 Bulbs + Dual Polarity Dimmer"},"content":{"rendered":"

The Edison CCT bulb set<\/strong> turns 64 classic-looking bulbs into one tunable white lighting system. You get 64 EDISON CCT LED light bulbs<\/a> and the Powered Bulb Dimmer Dual Polarity<\/a> that drives them. Each bulb hides three warm white and three cold white filaments behind classic Edison glass. It screws into any standard E27 socket<\/a>, and it answers to the WS2811 protocol. So instead of 64 bulbs locked to one colour temperature, you mix, fade and dim warm and cold white in every bulb \u2014 over a single data cable.<\/p>\n

What is in the Edison CCT bulb set?<\/h2>\n

The MEGA SET holds 64 EDISON CCT LED light bulbs and one Powered Bulb Dimmer Dual Polarity. The dimmer also brings a PowerCON power cable with the plug for your country. In addition, you get all 64 two-pole terminal block plugs. Therefore you only add the run from each output to its lamp holder.<\/p>\n

What the Edison CCT bulb set does not include<\/h3>\n

E27 lamp holders, fixtures and the cable to each socket stay outside the box, because they depend on your installation. However, the wiring is simple. Each dimmer output takes 0.5\u20131.5 mm\u00b2 wire in a 3.5 mm pitch terminal.<\/p>\n

Two filaments in one E27 socket, two whites<\/h2>\n

Every EDISON CCT bulb carries six LED filaments: three cold white and three warm white. The filaments sit anti-parallel. In other words, DC voltage in one polarity lights one colour temperature<\/a>, while the reverse polarity lights the other. The bulb itself runs at 32 V.<\/p>\n

Why anti-parallel wiring matters<\/h3>\n

Anti-parallel wiring lets a plain E27 socket carry two colour temperatures on only two wires. No third conductor, no driver inside the bulb, no wireless module to pair. But an ordinary dimmer cannot use it. Reverse the polarity and it simply sees a different load. Therefore the colour temperature control has to come from the controller.<\/p>\n

How does the dual polarity dimmer control the bulbs?<\/h2>\n

The Powered Bulb Dimmer Dual Polarity is a 64-channel SPI dimmer with its own power supply. It suits 31\u201333 V constant voltage fixtures with anti-parallel LED connection. Each of its 64 outputs drives both polarities on its own. So one output runs one bulb, and it handles both colour temperatures of that bulb.<\/p>\n

One output, two 8-bit channels<\/h3>\n

The first 8 bits of the WS2811 signal set the PWM level of one polarity. Then the second 8 bits set the other, with 256 levels each and a PWM frequency above 1000 Hz. In LED Strip Studio software<\/a> you therefore give each bulb a two-channel fixture on red and green. In short: two channels per bulb, not three or four.<\/p>\n

Where the Edison CCT bulb set works best<\/h2>\n

Warm filaments alone give the familiar glow of a vintage bulb. Cold filaments alone give a clean working light. Between them sits everything a restaurant, bar, lounge, showroom or stage needs across an evening. For example, one installation can run bright and neutral in the afternoon, and then warm and low at midnight.<\/p>\n

From mood light to music-synced animation<\/h3>\n

The Edison CCT bulb set speaks a standard lighting protocol. Because of that, it never sticks to one fixed scene. With LED Strip Studio software and a LED Ethernet Controller 3<\/a> you run animations across all 64 bulbs. For instance a slow drift between colour temperatures, a chase down a row of pendants, or a show that follows the music.<\/p>\n

Wiring the Edison CCT bulb set from mains to bulb<\/h2>\n

Mains arrives on the dimmer’s PowerCON input. It then passes through the PowerCON output to the next unit, so several dimmers share one supply run. Meanwhile WS2811 data comes in on RJ-45 and leaves on the second RJ-45. Cat5e or better carries it up to 100 m.<\/p>\n

Power and data in, bulbs out<\/h3>\n

On the output side, each of the 64 two-pole terminals feeds one lamp holder. Polarity at the terminal is not a mistake to avoid. On the contrary, it is the control mechanism. So a swapped pair simply swaps warm and cold on that bulb.<\/p>\n