LED Ethernet Controller Powered
€ 850.00 – € 1,400.00 excl. VAT
A perfect rental solution for large and rental LED installations. You can control up to 4096 individual RGB LED pixels (or 3072 RGBW pixels). LED Ethernet Controller Powered can be controlled by LED Strip Studio software, Art-Net (24 full universes maximal), DMX or can be operated by its stand-alone mode.
Plug and play solution with an integrated power source and Power-CON in/out connectors. The standard version allows you to daisy-chain power and ethernet signals.
Standard connectors allow you to connect your digital LED strips or LED pixels within seconds.
Description
LED Ethernet Controller Powered can be controlled by LED Strip Studio software, Art-Net (24 full Art-net universes maximal), DMX or can be operated in stand-alone mode. Maximum of programmable RGB / RGBW LEDs is 4096 RGB / 3072 RGBW LEDs. There are 4 SPI LED outputs.
The required input is 88 ~ 264 VAC/47 ~ 63Hz (360W, without the LED strips) and output power is 5V/ 10A (per SPI output). Power in/out connector is PowerCON connector, 230V/20A max.
SPI out connector is standard 4 pin terminal with 5 mm contact spacing e.g. SH04-5-GY. DMX input/output connector is XLR 3-pin connector (optional 5 pin). Ethernet is 2 x RJ-45 connector, an internal switch, 100 Mbit/sec. An optimal SD card is Micro SD Card (FAT32, up to 32GB). You can also find a DIP switch and buttons for control in stand-alone mode.
LED Strip Studio software lifetime license is included with every LED Ethernet Controller POWERED.
In case you would like to control LEC POWERED over Art-Net or DMX, you can also use third-party hardware and software.
Additional information
| Weight | 3000 g |
|---|---|
| Dimensions | 395 × 155 × 44 mm |
| Maximum of LEDs | 4096 |
| Maximum of LEDs per Output | 1024 |
| Number of Outputs | 4 |
| Output power | 5V/ 10A (per SPI output) |
| Power In/Out connector | PowerCON connector, 230V/20A max |
| SPI OUT connector | standard 4 pin terminal with 5 mm contact spacing e.g. SH04-5-GY |
| DMX in port connector type | XLR 3-pin connector (optional 5 pin) |
| DMX out port connector type | XLR 3-pin connector (optional 5 pin) |
| Ethernet | 2x RJ-45 connector, internal switch, 100 Mbit/sec |
| SD Card | Micro SD Card (FAT32, up to 32GB) |
| Documentation | https://www.ledstripstudio.com/download/tech-specs/POWERED_LEC_tech_specs.pdf |
You may also like…
-
LED Ethernet Controller Powered – 4096-pixels (24 Art-net universes)
€ 1,400.00 excl. VAT Add to cart -
LED Ethernet Controller Powered – 2048-pixels (12 Art-net universes)
€ 1,125.00 excl. VAT Add to cart -
SPI Matrix – pixel LED decoder for Art-Net – 1024-pixels (6 Art-net universes)
€ 299.00 excl. VAT Add to cart
